Comments
-
I'm back!! Now I suspect it may be code, either on the SonicWall side or the ISP modem/router side. I now have an NSa2700 which just experienced the same symptom. I put a little 5 port HP Gig switch between the X1 interface and the ISP, the problem goes away.
-
Issue still persists 2+ months later with latest 7.1.1 code on TZ270s. 3 more sites with similar issues this month alone, again with Bell Hub 2000 router/modems (Canada). Fixing X1 to 1G/FD made no difference, but adding a dumb little gig switch between them seems to help, another spof. Freddy...
-
We do 2FA with GVC via MS365 + on prem MS NPS. NetExtender is a better option for MFA but licenses cost more.
-
Wow, still the same issue lingers on, disappointing. For over a year, I've been living the nightmare of a TZ270 with a flapping X1 port but my customer's unit is behind a Bell Hub 2000 router/modem. The interface drops are more in the 5-6 seconds range and only during the day, nothing at night. I also tried the X1/X2 swap…
-
Here we are 2023 with no proper integration of the GVC client with Microsoft Azure MFA. This is killing me and the Fortinet folks are walking all over my accounts, their IPSEC VPN client does it all. I've setup several small clients with the NPS Plugin solution but its not a TOTP, its just a "is that you" solution so no…
-
What blows my mind is that I checked another site but with a TZ350, same 192.168.1.1/24 LAN subnet, same firmware, not PPPoE though, worked fine without the source NAT......
-
Windows Firewall was disabled and there is no AV on this host. Other non-Windows devices like printers and switches were tested, again with no response. Pings from the SonicWall to the various hosts work fine. MAC addresses look fine. The only ping that works is to the SonicWall's LAN IP....